Although they are handy for a lot of products, aerosol cans could be disqualified if not handled properly. Explaining the theory of their blown-up status is the first step to a safe use of aerosol cans. Many aspects act together in order for this hazardous event to happen.

Pressure Build-Up

One of the leadings causes of the explosion is the increase in pressure. The pressurized gases contained in the aerosol cans help the gas to be released to the environment. When the temperature goes up, the gas wants to expand, thus the pressure inside the aerosol can rises. If the pressure of the gas is higher than that of the can, then the explosion takes place.

Inadequate Ventilation

A very common cause of problems is also bad aeration. If aerosol cans are kept in a place without air, it can become extremely hot due to a shortage of ventilation in the area. The heat will push pressure even higher, meaning there will be a lot of pressure in a can that’s without an outlet. Under such conditions, the safety of rupture becomes much more acute because of the properly eliminated air.

Damaged Containers

Containers that are already damaged can be extremely dangerous. Different defects like dents, scratches, and the rusting of the surface are capable of destroying the can’s structure. The internal pressure, if the can has already got a hole, will become too strong for the can and it will lead to the burst. The manufacturers of aerosol dome are of the opinion that they only produce reliable stuff made of materials that can resist any damage to prevent such issues.

Exposure to Heat

The point of time of too much heat is the fourth significant factor that leads to the explosion. The unsafe situation takes place when aerosol cans are forgotten in high temperature rooms, such as a car or close to the hot area. The heat, thereupon, leads to the gas’ expansion in the aerosol can and the expansion of gas leads to the occurrence of explosions. The prevention of explosions is considerably easier when people know how to identify the primary safety problems.

Incorrect Usage

Using the products from the aerosol incorrectly is one of the causes that can lead to an explosion. E.g. making a hole in the can or using it near a place with flames might lead to a fast release of the pressure and thus cause the explosion. The use in the right way according to the safety regulations provided by the manufacturer is a must.

Conclusion

Basically, spray cans are dangerous because they are subject to the following factors: internal pressure fluctuations, an insufficient airing of the room and harm caused. Being aware of these risks gives customers the control to use aerosol products in a safe way. If the customers find aerosol cans coming from the dome suppliers they trust, they may also take the chaos of a potential hazard down. The customers must always be responsible in the proper storage of their aerosol items and in following the instructions for their safety.